View source for Auto Night Lights

"The 'Activate' var only works when the sensor is in the horizontal position"

''Tested in v0.2.3036.15111 and lights don't turn off during daytime.''

This is an Auto Night Lighting circuit to toggle outside lights on during nighttime.

The Items you will need are as follows.

* 1 [[Kit_(Logic_Memory)]]
* 2 [[Kit_(Logic_I/O)]]
* 1 [[Kit_(Logic_Processor)]] ("Compare Unit")
* 1 [[Sensors]] (If on same circuit as Solar adjuster, can use that Sensor)

ALMemory set to 0

BatchWriter
* I/O set to Input from ALCompare
* Output to Wall Lights
* Var to On

Reader
Input set to Sensor
Var set to Activate

Compare
Input1 set to Reader
Input2 set to Memory
set chip to equals<br>
<br>
<gallery>
CommentedPic.jpg|Full Visual with Settings
Auto Night Light Circuit.jpg|Visual Only
</gallery>
[[File:CommentedPic.jpg|thumb]]
[[File:Auto Night Light Circuit.jpg|thumb|Circuit Showing Night Light system]]