View source for Basic Canister Mixing Setup

'''Parts required'''
* In line pipe canister connector
* 2 Gas connector platform
* Pipes
* Gas mixing valve
* Wires to connect gas mixer to power

'''Setup'''
# Place the 2 Gas connector platforms
# Connect the 2 gas connector platforms to the inputs of the gas mixer
# Connect the gas mixer output to the canister connector
# Connect the gas mixer power input to power.


'''Use'''
# Put a large bottle or scrubber filled with O2 on one platform.
# Put a large bottle or scrubber filled with H2/volatile on the other platform.
# Use a wrench to connect both to their platforms.
# Set gas mixer to desired combination (33% O2 67% H2)
# Turn on gas mixer
# Place empty canister in inline connector.