Sleeper

<languages/> <translate>

Kit (Sleeper)

Recipe
Created With	Fabricator
Cost	10g Iron, 2g Gold, 3g Copper

Sleeper

Operation
Power Usage	100W
Construction
Placed with	Kit (Sleeper)
Placed on	Small Grid
Stage 1
Deconstruction
Deconstructed with	Hand Drill
Item received	Kit (Sleeper)

Description

A Sleeper stops the hunger timer while inside. Once properly setup and maintained, allows for controlled sleep giving a safe place to log off. No surrounding atmosphere needed to operate, can go in with full suit and open visor to use.

Basic Setup Example

• Build the Filtration, put in oxygen filter so it throws out the rest
• On the output build a Gas Tank Storage or similar.
• And a Pressure Regulator to feed a constant pressure to the sleeper (27-100kpa).
• Passive Vent or similar to eject the co2 from the waste output.

• Wire it up.
• put your suit airtank in the system (will use 4000kpa from it to charge the pipes).
• Then turn on and jump in for a good nights rest.

This design works because the sleeper connector is bidirectional, and it needs a constant trickle of air flowing to draw out the co2 and clean it up.

Once you build larger systems you might want to feed the air at a proper temperature too, but fresh spawned characters have 20c oxygen tanks.

Advanced Setup Example

This setup is fully autonomous and will take care of maintaining temperature, pressure as well filtering.

• Pressure Regulator is set to desired pressure (100kPa)
• It is important to place AC and Filtration in the specified order
• Oxygen Tank could be any source of oxygen Build the Filtration, put in oxygen filter so it throws out the rest
• Set AC temp to something suitable (20°C)
• Build Heat sink similar to Guide (Air Conditioning), use any suitable coolant, but make sure to have at least 100kPa in heat sink pipe.

</translate>