Pipe Gas Mixer

<languages /> <translate>

Pipe Gas Mixer

Properties
Stacks	No
Recipe
Created With	Hydraulic Pipe Bender, Fabricator
Cost	2g Iron, 2g Gold, 2g Copper

Description

Used to mix two gasses in proportions ranging from 0-100%. A must have for the Furnace. Input 1 is the straight thorough route, and Input 2 is the side entry.

!warning! As of version ,it appears that the pipe gas mixer does not honor the "on/off" switch on the object, and will pump gas regardless if it is on or not. Have not tested the data element "on/off" yet

Data Network Properties

These are all Data Network properties of this device.

Data Parameters

These are all parameters that can be written with a Logic Writer, Batch Writer, or Integrated Circuit (IC10).

Parameter Name	Data Type	Description
Lock	Boolean
Setting	float	Correspond to the percentage value of the Input 1
On	Boolean

Data Outputs

These are all parameters, that can be read with a Logic Reader or a Slot Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.

Output Name	Data Type	Description
Power	Boolean
Error	Boolean
Lock	Boolean
Setting	float	Contains the current Input 1 value in percent (60.5 for example)
Maximum	float	Value of 100
Ratio	Float	Contains the ratio corresponding to the Input 1 value (0.605, for the 60.5 value above)
On	Boolean
Requiredpower	Integer	In Watts. The Gas Mixer require 100W of power to function

</translate>