Circuitboard (Air Control): Difference between revisions

Console (Air Control) in setup mode
	File:Console Air control setup.jpg
Operation
Construction
Placed with	{{{placed_with_item}}}
Placed on	{{{placed_on_grid}}}
	v; t; e;

Console (Air Control)
	File:Console Air control.jpg
Operation
Construction
Placed with	{{{placed_with_item}}}
Placed on	{{{placed_on_grid}}}
	v; t; e;

Circuitboard (Air Control)
	File:Circuitboard Air control.jpg
Properties
Stacks	??
Recipe
Created With	Electronics Printer, Fabricator
Cost	5g Copper, 5g Gold
	v; t; e;

← Older edit Newer edit →

Revision as of 03:53, 17 February 2018

Description

Circuitboard (Air Control) can be placed inside of a Console to form a Air Control Console. It is one of many Circuitboards that can be fitted to a Console.

Air Control

The Air Control circuitboard in a console can be used to control active vents and display information about the environment.

Setup

Setup mode can be entered by placing a Data Disk into the slot on the Console.

The setup mode has three options: Pressure, Draught, and Offline. For basic functionality, at least one Gas Sensor and Active Vent should be selected on the setup screen.

Operation

Pressure mode with automatically try to maintain pressure at 100kPa, toggling the active vent between inward and outward.

Draught mode fills the room to 100kpa but then keep air flowing both ways.

Offline disables the active vent.

Manual Operation Disabled
Operation
File:Composite Air disabled.jpg
Construction
Placed with	{{{placed_with_item}}}
Placed on	{{{placed_on_grid}}}
v t e

</translate>

@@ Line 26: / Line 26: @@
 Setup mode can be entered by placing a [[Data Disk]] into the slot on the [[Console]].
-The setup mode has three options to control one or more active vents in combination with a gas sensor: Pressurize, Draugh, and Offline.
+The setup mode has three options: Pressure, Draught, and Offline. For basic functionality, at least one [[Gas Sensor]] and [[Active Vent]] should be selected on the setup screen.
 <!--T:6-->
@@ Line 37: / Line 37: @@
 == Operation ==  <!--T:7-->
-Pressurize mode sets the selected active vent to automatically output gas until about 100kPa of pressure, once this threshold is reached it turns the active vent off.
+Pressure mode with automatically try to maintain pressure at 100kPa, toggling the active vent between inward and outward.
-Draugh mode sets the active vent to intake air.
+Draught mode fills the room to 100kpa but then keep air flowing both ways.
 Offline disables the active vent.