Pipe Digital Valve

Pipe Digital Valve

Properties
Stacks	No
Recipe
Created With	Hydraulic Pipe Bender, Fabricator
Cost	2g Copper, 5g Steel, 3g Invar

Pipe Digital Valve

Description

A valve which can be operated by logic network. Switching its "On" variable to 1 causes the valve to be fully open, switching to 0 closes the valve completely.

Data Network Properties

These are all Data Network properties of this device.

Data Parameters

These are all parameters that can be written with a Logic Writer, Batch Writer, or Integrated Circuit (IC10).

Parameter Name	Data Type	Description
Lock	Boolean	Locks the Pipe Digital Valve, when set to 1. Unlocks it, when set to 0.
Setting	Float	Does not function.
On	Boolean	Turns the Pipe Digital Valve on, when set to 1. Turns it off, when set to 0.

Data Outputs

These are all parameters, that can be read with a Logic Reader or a Slot Reader. The outputs are listed in the order a Logic Reader's "VAR" setting cycles through them.

Output Name	Data Type	Description
Maximum	Integer	Returns 100. (Assumption) Returns the maximum throughput percentage of the Pipe Digital Valve.
Lock	Boolean	Returns whether the Pipe Digital Valve is locked. (0 for no, 1 for yes)
Error	Boolean	Returns whether the Pipe Digital Valve is currently flashing an error. (0 for no, 1 for yes)
Setting	Float	Returns a range from 0.0 to 100.0. Does not function. (Assumption) Returns the percentage of opening of the Pipe Digital Valve.
RequiredPower	Integer	Returns the current amount of power needed for the Pipe Digital Valve.
Ratio	Float	Returns a range from 0.0 to 1.0. Does not function. (Assumption) Returns the differential in pressure between the sides of the Pipe Digital Valve.
Prefab Hash	Integer	(Assumption) Returns (-1280984102) a unique type identifier for the Pipe Digital Valve.
Power	Boolean	Returns whether the Pipe Digital Valve is receiving power and is turned on. (0 for no, 1 for yes)
On	Boolean	Returns whether the Pipe Digital Valve is set to on. (0 for no, 1 for yes)