Kit (Iron Wall)

Kit (Iron Wall)
Properties
Stacks	Yes (30)
Recipe
Created With	Autolathe
Cost	1g Iron
	v; t; e;

Purpose

A Kit (Iron Wall) is used to build a basic wall that is suitable for separating differing atmospheric environments. You can also attach devices on the face side of the wall.

Once the Iron Walls are placed, the walls are then completed by placing Iron Sheets over them, the placement of which does not require tools. In order to disassemble, the Crowbar is needed to remove the Iron Sheets, then the Angle Grinder is used to remove the Iron Walls.

The kit offer two variants : an opaque wall or a window :

The wall requires one Iron Sheet to complete
The iron window requires one Iron Sheet, then one Glass Sheet to complete. This window is similar to the steel one, except there is no white border around the glass

Characteristics

All variants of Kit (Iron Wall) share the following characteristics:

They are guaranteed to be airtight.
They have relatively low resistance to Pressure on the face side compared to other Walls.
They have relatively low resistance to Damage compared to other Walls.
They can be used in the construction of a Room.

Variants

Variant	Requirements	Pressure rupture point (kPa)
Iron Wall (Type 1)	1 x Kit (Iron Wall) + 1 IronSheet	200
Iron Wall (Type 2)	1 x Kit (Iron Wall) + 1 IronSheet	200
Iron Wall (Type 3)	1 x Kit (Iron Wall) + 1 IronSheet	200
Iron Wall (Type 4)	1 x Kit (Iron Wall) + 1 IronSheet	200
Iron Window	1 x Kit (Iron Wall) + 1 IronSheet + 1 GlassSheet	200

Manufacture

Manufacturer	Requirements
Autolathe	500 Power, 1g Iron

Recycling

Kit (Iron Wall)s can be recycled using a Recycler in conjunction with a Centrifuge to yield #g Iron and #g Copper

Destruction

Kit (Iron Wall)s can be destroyed using a Arc Furnace, a Furnace or with multiple shots from a Weapon