Sleeper
From Stationeers Wiki
More actions
<languages/> <translate>
 | |
| Recipe | |
|---|---|
| Created With | Fabricator |
| Cost | 10g Iron, 2g Gold, 3g Copper |
| Operation | |
|---|---|
| Power Usage | 100W |
| Construction | |
| Placed with | Kit (Sleeper) |
| Placed on | Small Grid |
| Stage 1 | |
| Deconstruction | |
| Deconstructed with | Hand Drill |
| Item received | Kit (Sleeper) |
Description
Once properly setup and maintained, allows for controlled sleep giving a safe place to log off.
No surrounding atmosphere needed to operate, can go in with full suit and open visor to use.
Basic Setup Example
- Build the Filtration, put in oxygen filter so it throws out the rest
- On the output build a Gas Tank Storage or similar.
- And a Pressure Regulator to feed a constant pressure to the sleeper (27-100kpa).
- Passive Vent or similar to eject the co2 from the waste output.
- Wire it up.
- put your suit airtank in the system (will use 4000kpa from it to charge the pipes).
- Then turn on and jump in for a good nights rest.
This design works because the sleeper connector is bidirectional,
and it needs a constant trickle of air flowing to draw out the co2 and clean it up.
Once you build larger systems you might want to feed the air at a proper temperature too,
but fresh spawned characters have 20c oxygen tanks.
</translate>